What is the water pipe used for?
Use the custom water pipe to add humidity to your vapor and reduce dry, itchy throats. If you suffer from coughing or just want smoother, flavorful vapor this is what your missing!
The Crave Air water pipe allows for cool, moisture conditioned vapor production. The precision engineered glass enables smoother hits by forcing the vapor through small slits in the bubbler. Once filled up with water this setup efficiently hydrates each draw for a refreshing finish.
Cold clouds are the future.
Using the water pipe
To begin enjoying water chilled vapor, attach the silicone bubbler adapter to your Crave Air. Fill the glass with water until the holes in the lower reservoir are completely covered. Then snugly fit the glass bubbler into place on the adapter. Once connected you can draw directly from the bubbler.
Cleaning the water pipe
The water is recommended to be changed when you refill the oven with fresh herbs, this will ensure clean tasting vapor.
Empty the used water by separating the glass from the silicone adapter and blowing into the mouthpiece. This will force the water out the other end of the pipe. Refill the water and repeat the steps 2 more times to ensure that all the used water has been replaced.
If you notice residue build up inside the water pipe, it is time for a deep clean.
Keep the water pipe filled with water and submerge the whole pipe in a bowl of hot water for 15-20 mins, this will loosen any residue. You may also submerge the pipe in iso-alcohol to remove stubborn deposits.
The glass is also dishwasher safe.After cleaning, thoroughly wash with clean water and use normally.